Sheet Guide (Narrow w/Cut Out) for Komori L40 and L28
MSRP:
Was:
Now:
$59.00
(You save
)
(No reviews yet)
Write a Review
Write a Review
×
Sheet Guide (Narrow w/Cut Out) for Komori L40 and L28
- SKU:
- SH-GS-K3
- UPC:
- Bulk Pricing:
- Buy in bulk and save
- Buy 4 or above and get $4.00 off
Bulk discount rates
×Below are the available bulk discount rates for each individual item when you purchase a certain amount
Product Description
Order 4+ units and pay only $59.00 each. (Discount will show at checkout)
Sheet Guide for Komori L40 & L28 - Width 38mm / 1.5", with 1/2" notch on front edge.
Please note: this sheet guide is not designed for the Komori LS40.

Pile Separator / Plastic Wedge - Combo Pack (2 Medium and 2 Small)
MSRP:
Was:
Now:
$29.50

Lithco
Ionix Static Eliminator for Air Hose w/ID 1-1/4" or smaller.
MSRP:
Was:
Now:
$170.00 - $195.00

Sheet Separator 301 Least Stiff for Komori/Shinohara - .004" / .10mm thick, Bag (25)
MSRP:
$29.95
Was:
Now:
$21.95

Sheet Separator 303 Stiffest for Komori/Shinohara - .012" / .30mm thick, Bag (25)
MSRP:
$29.95
Was:
Now:
$21.95

Sheet Separator 302 Medium Stiff for Komori/Shinohara- .008" / .20mm thick, Bag (25)
MSRP:
$29.95
Was:
Now:
$21.95

Replacement Sheet Guide (Medium) for Komori L40 and L28 replaces 274-6823-301
MSRP:
Was:
Now:
$64.00

Replacement Sheet Guide (Medium) for Komori L40 and L28 replaces 274-6823-301
MSRP:
Was:
Now:
$64.00

National Offset Warehouse
RS200KPL-10 - Replacement Plate Loader Sucker for Komori - Pkg (10) Replaces FGR9135014 and FYL9350500
MSRP:
Was:
Now:
$131.50

Hold Down Brush (Sheet Steadier) Replacement for Man-Roland, 84mm x 19mm
MSRP:
Was:
Now:
$52.50

Replacement Feeder Belt - Heidelberg for SORKZ, SORMZ, SORDZ replaces 66.020.029
MSRP:
Was:
Now:
$21.50

Sheet Separator 303 Stiffest for Komori/Shinohara - .012" / .30mm thick, Bag (25)
MSRP:
$29.95
Was:
Now:
$21.95